Home Sauna Design Elements

Home Sauna Design Elements

Sauna Design Request | Renovation
If the ground is not high enough, it is enough to make a cement floor. When making the wall and the ground, the waterproofing of the wall and the ground should be done first. For the walls of the sauna room and the steam room, from a strict point of view, thermal insulation is required.

Sauna Design Request - Motor Aspects
A floor drain should be reserved in the middle of the sauna room and the steam room; the power supply reserved for the sauna room and the steam room should be maintained with leakage current; the installation of other equipment, the connection of water pipes and electric pipes, and the installation of electric lights should be handed over to the sauna professional. Technician to complete.

Dry sauna installation
According to the design requirements, the wall of the sauna room shall be constructed and treated; the waterproofing project shall be done; the power supply and water source shall be preset according to the design requirements; the interior of the sauna room shall be paved with heat-treated pine boards; Tempered glass door. Install the sauna stove and accessories, and connect its power and water sources.
Back to blog